Stirred water bath that is ideal for checking the calibration of a wide range of instrumentation including thermometers and data-loggers. The stirred water bath incorporates a temperature controller with a LED display, heater and circulation pump.
The stirred water bath offers a high level of stability (±0.5°C) and a stabilisation time of 30 minutes. Switch it on, set the verification temperature and insert your probe into the stirred water bath. Compare the temperature reading of your thermometer to the display and the difference is the error. A traceable certificate of calibration is included.

The stirred water bath will control the temperature of the water or oil over the range of ambient to +100°C. The seamless stainless steel tank gives a large open workspace with a capacity of 10-litres. Each bath is supplied complete with a stainless steel cover.

• stainless steel bath with a 10-litre capacity



• temperature heat source ambient to +100°C

calibration bath temperature checker
The mini temperature calibration bath is a compact, no frills, tabletop device that can cool water to 0°C (±0.5°C) or heat water to a temperature of +56°C (±0.5°C). The bath is a simple, easy to use device to aid in the comparison calibration of temperature probes. A regular everyday calibration check of a thermometer and probe as a system is essential to maintain confidence in your readings.

Depending on the instrument and its intended temperature and use, the mini temperature calibration bath provides iced water and hot water, which can be used for checking the accuracy of a thermometer and probe.

When used properly and in conjunction with a Reference thermometer, this offers a cost-effective method of calibration and verification.