MiniTherma K thermocouple thermometer

^{£
ExVAT}

MiniTherma K thermocouple thermometer

MiniTherma probe thermometer, catering thermometer

The MiniTherma K thermometer is designed for versatility and ease of use in the food and catering industry. The thermometer accepts a miniature type K thermocouple plug that enables a variety of interchangeable thermocouple probes to be used. The thermometer incorporates a clear digital display with a precise read-out of temperature over the range of -59.9 to +1399°C with a 0.1°C resolution between -59.9 to +199.9°C thereafter 1°C.

The thermometer features a display hold function and both low battery and open circuit indication are displayed, when applicable. An auto-power on/off facility turns the instrument off after four minutes, maximising battery life.

810-990	MiniTherma K thermometer kit	^{£ Ex VAT}
133-161	penetration probe	^{£ Ex VAT}
133-151	fast response probe	^{£ Ex VAT}
133-301	air or gas probe	^{£ Ex VAT}
133-045	surface probe	^{£ Ex VAT}
133-155	FEP (plastic) probe	^{£ Ex VAT}
839-095	3 volt CR2032 coin cell	^{£ Ex VAT}

The MiniTherma K is lightweight, at less than 40 grams. The case is manufactured from high impact ABS plastic designed to cope with routine day-to-day applications. Each MiniTherma K is supplied as a kit with a penetration probe (133-161) and battery, all in a protective PVC zip wallet.

• a variety of interchangeable type K probes can be used

• water resistant offering IP65 protection

specification	MiniTherma K
range	-59.9 to +1199.9°C
resolution	0.1°C
accuracy	±1% or ±1°C over the full range
battery	3 volt CR2032 lithium coin cell
battery life	100 hours
sensor type	K thermocouple
display	custom LCD
dimensions	19 x 40 x 76mm
weight	36 grams

MicroTherma 3 thermometer
The MicroTherma 3 microprocessor based thermometers measure temperature over the range of -270 to +1768°C, depending on the thermocouple type, with a 0.1°C resolution over the entire range. Each thermometer incorporates an easy to read, multi-function 4½-digit LCD display with open circuit, low battery and hold indication.

The thermometers should never need re-calibrating, as the built-in microprocessor enables the instruments to continuously and automatically carry out self-diagnostic re-calibration.

Each unit also incorporates an auto-power off facility which maximises the battery life, turning the instrument off automatically after 30 minutes. The MicroTherma 3 features a display hold facility. Seven models are available that utilise type K, J, T, R, N, S or E thermocouple probes.

For details of the extensive range of thermocouple probes available click here.

plug-mounted probes
These plug-mounted probes are mounted directly into miniature type K thermocouple plugs. This provides an economical solution to many temperature measuring applications and allows the option of one-handed operation.

	133-161 penetration probe		^{£ Ex VAT}
	133-151 fast response probe		^{£ Ex VAT}
	133-301 air or gas probe		^{£ Ex VAT}
	133-045 surface probe		^{£ Ex VAT}
	133-155 FEP (plastic) probe		^{£ Ex VAT}