The RayTemp 38 is a professional infrared thermometer with dual laser dot alignment. The RayTemp 38 thermometer incorporates a 50:1 optic ratio (target distance/diameter ratio), this enables users to measure small targets from a distance. The user stands a safe and comfortable distance from the target, points the thermometer at the surface to be measured, pulls the trigger and instantly reads the temperature. Ideal for measuring the temperature of ceiling vents and hot pipes in the HVAC industry or any other item that is difficult to reach. This enables the user to measure most surfaces accurately and quickly.

This RayTemp infrared thermometer measures the surface temperature over the range of -60 to +1000°C with a 0.1°C (-9.9 to +199.9°C) or 1°C resolution.

Now available with re-chargeable battery option!

The RayTemp 38 incorporates an auto power off facility that turns the instrument off after 60 seconds, maximising battery life. This function can be disabled, if required. Each unit incorporates a clear, easy to read, backlit custom LCD display that indicates both the temperature and the emissivity. The thermometer features a four-button keypad, allowing the user to select the mode required, i.e. max, min, differential and average temperatures, view the max/min high and low alarms and adjust the emissivity from 0.1 to 1.0 in 0.01 increments (default set at 0.95).

• wide temperature range -60 to +1000°C



• ideal for high temperature industrial applications

• target ratio 50:1 - ideal for maesuring small targets

• robust housing for reliability

thermocouple type K probes
Thermometers are only part of the system, of equal importance is the design of the temperature probes used to physically measure the item. ETI manufactures an extensive range of type K or J thermocouple probes to complement the RayTemp thermometers.

Choose the ones that suit your needs from many options.

Comparator for infrared thermometers
The infrared thermometer Comparator provides a stable black body temperature source and is an inexpensive way of checking infrared hand held thermometers when used in conjunction with a Reference thermometer.

The Comparator consists of an aluminium cup Ø60 x 100mm with a solid matt black base. The base incorporates two Ø3.5mm holes, one for a Reference thermometer's probe and the other for an additional probe, if required.

accessories
A magnetic holder is available for the Raytemp 38. This holder screws into the screw mount on the bottom of the Raytemp 38 and the unit can then be mounted onto a metal surface. Please note some painted metal surfaces or light metalled surfaces will not hold the weight of the Raytemp 38 in a horizontal position.

	814-150 magnetic holder		£  Ex VAT
	839-160 MN2400 1.5 volt		£  Ex VAT