Data Loggers

ThermaData logger

The ThermaData logger is probably the most cost effective temperature datalogger or blind recording thermometer available today. It is a self-contained instrument designed to record the temperature of the surrounding environment. The total recording time and sample rate can be easily selected from the
software and, unlike most low cost loggers, the ThermaData logger will continue recording during and after downloading the data. By selecting continuous logging it is possible to start the ThermaData logger only once and never have to reset its parameters again, even if downloaded regularly.

The user can set high and low alarm values for an application. A button push will allow a simple visual inspection of the unit to show if either of these limits has been exceeded. An illuminated red LED will warn the user that the alarm limits have been exceeded (reject) or an illuminated green LED will advise the user that the alarm limits have not been exceeded (accept). The ThermaData logger is housed in a water resistant polyethylene case.

The ThermaData logger is connected to a PC via a serial or USB port lead. Once connected, the data is downloaded and can be displayed either as a graph, table or summary within seconds of clicking on the relevant icon. The information can then be analysed by zooming in, storing to disc or exporting to other software packages.

TR Digital Data-Loggers

The TR digital data-loggers can record temperature from -40 to +85°C and humidity from 0 to 100%
RH, where applicable. Three models are available, one model incorporates an external temperature probe. All the TR data-loggers will record the temperature and model 849-020 will additionally record the humidity (% RH). Each TR data-logger incorporates two bright, flashing LED displays. The yellow LED indicates when the logger is active and logging, the red LED indicates when the pre-set alarm levels have been exceeded. The TR data-loggers are housed in a white ABS water resistant case.

The TR data-loggers can be programmed to record temperatures at given time intervals, as often as once a second up to every two hours. The unit is powered by a replaceable 3.6 volt lithium battery with a life expectancy of up to approximately one year or three months continuous use in non-sleep mode. The loggers incorporate a real-time clock and enough memory to store 16,000 samples/readings. Via the TRLog software, the user can select the start mode - immediate via PC software, schedule a start time or a manual magnetic start, give each TR data-logger a unique ID and set the high and low alarm values.

TR data-logger software

 Each TR data-logger is programmed via the easy to use TR data-logger software. When the data from the TR data-loggers is downloaded, the data can be displayed as a graph, a data table or statistically, within seconds of clicking on the download icon. The information can be analysed by zooming in, storing to disc or copying and pasting into other software packages.