|
This range of industrial microprocessor based pressure meters offers high accuracy, performance and repeatability. The instruments allow the user to select one of 11 measuring units; bar, mbar, psi, kPa, inHg, mmHg, ozin, inH2O, ftH2O, cmH2O and kgcm. Four models are available indicating pressure over the range of ±100 psi (±6895 mbar). All instruments feature over pressure protection to at least twice the measuring capacity.
The units incorporate a manual zeroing, a maximum and minimum pressure reading function and an LCD backlight.
These easy to use digital pressure meters are ideal for a wide range of applications in industry for measuring non-corrosive gauge or differential air or gas pressure. The instruments are housed in a robust ABS case and feature a custom LCD display with hold, low battery, max/min indication, additionally the unit has a RS232 output.
The digital pressure meters are powered by a standard 9 volt battery with a minimum life expectancy of 60 hours continuous use, alternatively an optional 230/9 volt AC/DC power adaptor is available for continuous monitoring.
Each instrument incorporates the benefit of an auto-power off facility which maximises battery life, turning the instrument off automatically after approximately 20 minutes.
Each digital pressure meter is supplied with a carrying case, operation manual and two 500mm long connection hoses. The ETI 8205 pressure meter is supplied with large low pressure barbed connectors (for 6mm ID tube). The ETI 8215, 8230 and 82100 pressure meters are supplied with small high pressure barbed connectors (for 4mm ID tube).
optional RS232 lead & software
The digital pressure meters incorporate, as standard, an RS232 output socket. The RS232 lead and software is available as an optional extra allowing the user to log, record and analyse data.
|
protective PVC boot
An optional protective PVC boot is available that helps to protect instruments against accidental damage. The 825-210 protective boot is for use with the ETI 8200 series of pressure meters. Additionally the boot is compatible with the ETI 8711 Therma-hygrometer and the ETI 8601 pH/mV meter.
|
|
|
|
free carrying case
Each digital pressure meter is supplied complete with a free carrying case, two 500mm long connection hoses and an operation manual.
|
|
